tekmolding017218013019.gif
tekmolding017218013018.gif
tekmolding017218013017.gif
tekmolding017218013016.gif
tekmolding017218013015.gif
How To Use Prenco-TypeŽ Kit Model No. 503
PAGE 1 OF 2
TEK Molding, LLC
Home of Kennecorp and Prenco-TypeŽ Divisions
tekmolding017218013014.gif
tekmolding017218001001.gif
Home of
5031tran.gif
5032tran.gif
5033tran.gif
tekmolding017218013013.gif
tekmolding017218013013.gif
tekmolding017218013012.gif
Figure 1
tekmolding017218013012.gif
Figure 2
tekmolding017218013012.gif
Figure 3
tekmolding017218013011.gif
tekmolding017218013010.gif
tekmolding017218013009.gif
tekmolding017218013008.gif
tekmolding017218013007.gif
tekmolding017218013006.gif
tekmolding017218013005.gif
tekmolding017218013004.gif
tekmolding017218013003.gif
Insert chase all the way into groove of the Cutting Block and lock in position with the winged thumb screw provided, Figure 1. Make sure Chase is seated properly in Cutting Block.
Select Type Strip and insert into slot of Cutting Block and move strip forward until the space between letters is centered under blade of cutter, Figure 2.
winged thumb screw
Type Strip
Type Skirt
Press handle of Type Cutting Device downward severing letter from strip, Figure 3.

Hold handle down and remove the Type Strip from cutting device. Release handle, select next type strip and insert next letter pushing first letter already cut deeper into chase.
b-norm2.gif
Return to Previous Page
tekmolding017218013001.gif
NEXT PAGE
PAGE 1 OF 2
Page Last Modified 3/2/18 by Lori Kooger@tekmolding.com