tekmolding017218015009.gif
tekmolding017218015008.gif
tekmolding017218015007.gif
tekmolding017218015006.gif
tekmolding017218015005.gif
How To Use Type Adapter with Prenco-TypeŽ Kit Model No. 501
PAGE 1 OF 2
TEK Molding, LLC
Home of Kennecorp and Prenco-TypeŽ Divisions
tekmolding017218015003.gif
NEXT PAGE
tekmolding017218015002.gif
tekmolding017218001001.gif
Home of
5011tran.gif
5012tran.gif
5013tran.gif
tekmolding017218013013.gif
tekmolding017218013013.gif
tekmolding017218015001.gif
Figure 2
tekmolding017218015001.gif
Figure 1
tekmolding017218015001.gif
Figure 3
Adapter is attached to type cutting device by inserting pins into holes of adapter as shown in Figure 1.
PAGE 1 OF 2
Type strip desired is inserted into "T" slot of cutting block, Figure 2, and moved forward until the space between letters is centered under cutting blade.

Press handle of cutting device downward severing letter or number, etc. from strip. Hold handle down and remove strip from cutting block.

Choose next type strip and repeat procedure, when line of text is completed push it well into adapter.
Remove adapter from cutting device
b-norm2.gif
Return to Previous Page
Page Last Modified 3/2/18 by Lori Kooger@tekmolding.com